First item DRAIN
pose little problem. Undo fittings and lift off brackets or
8if they are fastened on with nuts and bolts (like some of
ours) use a ratchet set to un fasten from the wall mounts.
I recommend turning the valves up to keep any remaining water
in the radiator from spilling out.
Many of the radiators
in this property were base board heaters. And as we are replacing
the old heating system entirely we are scrapping all the pipes
as well. An angle grinder was very useful in cutting the pipes
making extraction much easier.
We have installed
all new Hep2O and Barlo Radiators powered by
a Worcester Bosh Boiler.